driving shaft
英 [ˈdraɪvɪŋ ʃɑːft]
美 [ˈdraɪvɪŋ ʃæft]
主（传，驱）动轴；组合器轴
双语例句
- Discussion on production technology and die design of driving shaft bush in distributor
分电器传动轴衬套的生产工艺和模具设计探讨 - Critical rotary speed of the revamped driving shaft is also measured and analyzed.
并对改进后传动轴的临界转速进行了测定分析。 - The failure of the driving shaft in a hoister is caused by typical brittle fracture under low stress.
卷扬机传动轴的断裂为典型的低应力脆断事故，主要原因是传动轴的组织疏松、晶粒粗大、。 - Reasons and reformation of vulnerability of agitator driving shaft of final polycondensation reactor
终聚釜搅拌器传动轴损坏的原因及改造 - The axial movement of a clutch sliding bush on a driving shaft is made to clutch, and the operation is convenient.
利用离合滑套在主动轴上的轴向移动进行离合，操纵方便。 - The Front/ Reverse switching mechanism was placed on the driving shaft, while the acceleration clutch was placed on the driven shaft.
前/后机械开关安装在驱动轴上，同时加速离合器安装在从动轴上。 - The casing of the electricity generating gear box covers the driving shaft.
发电齿轮箱的外壳包覆驱动轴。 - The anti-sand structure of driving shaft oil seal has the advantages of preventing sand from damaging the oil seal and increasing the service life of engine of beach vehicle.
它能够防止沙尘对油封的损坏，提高沙滩车发动机的使用寿命。 - Simulation and Analysis on Driving Shaft in Float Glass Roller Annealing Lehr Based on FEA Method
基于有限元法的浮法玻璃退火窑辊道传动轴受力仿真分析 - The hollow sealed cylinder body matches with the driving shaft to carry a filter plate and the filter cake adsorbed by the filter plate.
中空密闭圆筒体配合传动轴来承载过滤盘及其上所吸附的滤饼。 - Performance Test of Automobile Driving Shaft Based on Virtual Instrument
基于虚拟仪器的汽车等速驱动轴性能测试系统 - The utility model relates to a motorcycle handle switch device which comprises a switch casing, a driving shaft, a contact ring, a contact sheet, a spring, a base plate and a wire.
一种摩托车手柄开关装置，包括开关壳体、传动轴、接触环、接触片、弹簧、基板以及配线。 - The bicycle driving shaft is provided with an electricity generating gear box.
在自行车驱动轴上设置一个发电齿轮箱。 - Reason Analysis and Improvement of Fracture Failure of Driving Shaft for DFH Middle Power Wheeled Tractor
东方红中轮拖驱动轴断裂故障原因分析与质量改进 - Coupling consists of two half parts, each with the driving shaft and driven shaft connection.
联轴器由两半部分组成，分别与主动轴和从动轴联接。 - A driving sprocket for the chain is driven by a driving shaft.
一用于此链条的驱动链轮由一驱动轴驱动。 - The universal adjustor and the driving shaft are respectively connected with an electrical apparatus control system.
所述万向调节器和驱动轴分别连接电器控制系统。 - Dynamic characteristic of power driving shaft with a film-disc coupling
带膜盘联轴节的动力传动轴的动力特性 - The sealing structure between the driving shaft ( 6) and the casing body ( 1) is sealed by adopting a packing set ( 7).
驱动轴（6）与壳体（1）之间的密封结构采用盘根（7）密封。 - Driving shaft is a key component of positive displacement motors and a vulnerable part.
传动轴是螺杆钻具中的关键零部件，也是易失效件之一。 - The bifurcation of main resonance can be removed by reducing the eccentricity and the order of main resonance and increasing damping of the driving shaft and intermediate supports.
可通过减小偏心距、降低主共振的阶数、加大传动轴及中间支点处的阻尼，使传动轴主共振不分岔。 - Considering the common failure features of driving shaft and common working condition, the mechanics analysis and finite element calculation were conducted.
针对传动轴常见失效特征，结合常用工况，进行了力学分析和有限元计算。 - The secondary adjusting hydrostatic storage tractor transmission system is composed of diesel engine, hydraulic accumulator, hydraulic pump/ motor ( secondary element), differential transmission, driving shaft and etc.
二次调节静液储能拖拉机传动系统是由柴油机、液压蓄能器、液压泵/马达（二次元件）、差动变速器和驱动轴等组成。 - Considering the torque fluctuation of the driving shaft and the existence of the backlashes in both gear pair and clutch, a lumped mass gear-rattling model is established.
在考虑主动轴驱动转矩波动、齿轮副齿侧间隙及离合器间隙的情况下，建立了同时含有离合器间隙和齿侧间隙的齿轮传动系统（简称双间隙系统）拍击振动分析的集中质量模型。 - The characteristic of the mechanism is that both the rollers as well as the cam are located on driving shaft and driven shaft, and the center of driving roller is just on the driving instantaneous center curve.
该机构的主要特点是，在主动轴和从动轴上同时布置滚子和凸轮，且主动滚子中心恰好位于主动瞬心线上。 - The rattling model of a one stage gear system is established, in which mass unbalance, speed fluctuation of driving shaft and backlash of the gear pair are considered.
在考虑不平衡质量、主动轴转速波动及齿侧间隙的情况下，建立了单级齿轮传动系统的拍击振动模型。 - A lumped mass gear-rattling model is established by considering the rotational speed fluctuation of driving shaft, mass unbalance in the gear shaft, time-varying mesh stiffness of gear teeth and backlash between the gear pair.
在考虑齿轮轴偏心质量、主动轴转速波动、轮齿时变啮合刚度及齿轮副齿侧间隙的情况下，建立了齿轮传动系统拍击振动分析的集中质量模型。 - By means of analysis and computation under different working conditions, accurate dynamic load characteristic parameters of the driving shaft, big bevel gear shaft, drum shaft, hydromatic brake shaft, fast line, dead line, hook and derrick are obtained.
通过不同工况下的分析运算，得到起升系统传动轴、大锥齿轮轴、滚筒轴、水刹车轴、快绳、死绳、吊环及井架起升和下钻过程较为准确的动载特性参数。 - The overall structural design mainly includes the design of pump shells, the design of rotor type line and design and check of driving shaft.
它主要包括泵壳的设计、转子型线的设计和主动轴的设计校核。